Using Philips Easylink - Philips 42PFD5519/30 User Manual

Using Philips EasyLink

Maximising the use of your Philips EasyLink
HDMI-CEC-compatible device can enhance
its control functions to the maximum level of
efficiency. HDMI-CEC-compliant devices that
are connected through HDMI connectors can
be controlled by the TV's remote control.
To enable Philips EasyLink, you'll need to:
Connect two or more HDMI-CEC
•
compatible devices through the HDMI
interface
• Confirm that every HDMI-CEC compatible
device is functioning properly.
Switch to EasyLink
•
Note
•
The EasyLink-compliant device must be switched
on and selected as the source.
• Philips does not guarantee 100% interoperability
with all HDMI CEC devices.
•
HDMI 1 and HDMI 2 have CEC functions.
Enabling or disabling EasyLink
After enabling the HDMI-CEC-compliant device,
the TV will automatically turn on and switch to
the correct source.
Note
•
Do not enable Philips EasyLink if you do not
intend to use it.
1
Press (Home).
2
Select Settings > TV Settings >
General Settings > EasyLink >
EasyLink.
3
Select Off or On and press OK.
22 EN-GB
Use One-touch Play
1
After enabling EasyLink, press play on your
device.
» The TV will automatically switch to the
correct source.
Use One-touch Standby
1
Press (Standby-On) on the remote
control.
» The TV and all connected HDMI
devices will switch to standby.
Setting up TV Speakers
1
Press ( Home ) .
2
Select Settings > TV Settings >
General Settings > EasyLink > TV
Speakers.
3
Select one of the following items and press
OK.
Close: Turns off the TV Speakers.
•
Open: Turns on the TV Speakers.
•
• [EasyLink]: Audio from TV
programmes continues to be
broadcasted through the TV speakers.
You can switch the TV audio to
connected HDMI- CEC audio devices
through Experisnce menu.
[EasyLink autostart]: Automatically
•
disables the TV speakers and transmits
audio and video signals from the TV
to the connected HDMI-CEC audio
frequency device.
Using HDMI-Audio Output
1
Open EasyLink.
2
Set up TV speakers and turn on EasyLink
Auto Startup].
3
Turn on HDMI2-Audio Output.
4
TV audio is switched to connected HDMI-
CEC audio devices.