Advertisement
ASSEMBLY
Installing side grip (auxiliary handle)
81
cover
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
Always be sure that the side grip is installed securely.
Install the cover, then screw the side grip on the tool securely. The side grip and the cover
can be installed on either side of the tool.
the side grip and the cover.
Cover
Side grip
Installing or removing abrasive disc
CAUTION:
Always be sure that the tool is switched off and unplugged before installing or removing
the abrasive disc.
Mount the rubber pad onto the spindle.
Fit
the abrasive disc on over the pad and
screw the lock nut onto the spindle.
Hold the spindle with the wrench
so
that
it
cannot revolve, then use the lock nut
wrench and securely tighten clockwise.
To remove the lock nut, follow the installa-
tion procedure in reverse.
Lock nut
Lock
nut wrench
7
Advertisement
