Network Connection - TCL 40S4800FS Operation Manual

Network Connection

To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service
provider (ISP).
Your TV can be connected to your home network in two ways:
- Wired, using the RJ45 (LAN) connector on the back panel.
- Wireless, using the internal wireless your home wireless network.
Note: Instructions below are just the usual ways to connect your TV to the wired or wireless network. The connection
home network, please refer to your ISP.
Connecting to a wired network
To connect to a wired network:
1. Ensure you have:
- An Ethernet cable long enough to reach your TV
- A router or modem with an available Ethernet port
- A high-speed Internet connection
- An Ethernet (LAN) port on the back of the TV
2. Connect your Ethernet cable to the router and to
the Ethernet port on the back of the TV.
3. Use the Network Configuration menu to
configure the TV.
Connecting to a wireless network
To connect to a wireless network
1. Ensure you have:
- A router broadcasting a high-speed wireless
signal
- A high-speed Internet connection
2. Use the Network Configuration menu to
configure the TV.
Connections and Setup
Router
or
Ethernet
Port on the
back panel
TV Set
Modem
Wireless Router
8
Modem Internet
TV Set
Built-in wireless
connection