Assembly Fan Module - ViewSonic PJD5112 Service Manual

Step
18
Speaker Module

3.3 Assembly FAN Module

Step
1
FAN Sponge*2
2
FAN Sponge*2
ViewSonic Corporation
Figure
J1635-3720-00*1
Figure
FAN PAD
24
Description
1. Remove Speaker Module.
2. Loosen the screws and
remove front and back IR.
Description
Assemble FAN2(J2394-0101-01):
1. Paste the FAN PAD
(P4E38-1070-00) on the middle of
it.
2. Paste the FAN Sponge*2
(P4R38-1530-00) on the top and
bottom of it as picture shown.
Assemble FAN1(J2394-0101-00):
Paste the FAN Sponge*2
(P4R38-1530-00) on the two edges
of it as picture shown.
Confidential - Do Not Copy PJD5112