Worcester DANESMOOR FS12/18 Installation And Servicing Instructions page 17

Fig. 17. Pre-wired Remote 3 or 2 Port Valve Control Sets
NOTE: When using a Worcester programmer set the pin on the rear of the programmer to 'Pumped'.
Remove link 1 to 3
Remote Pre-wired
Junction Box
10 WAY JUNCTION BOX
Earth
Neutral
Permanent Live
Switched Live
L N E E N 1 2 3 4 5 6
Burner Socket
17
NOTE: If a frost thermostat is required it
can be wired to the remote junction box.
NOTE: The 10 way junction box must be
a terminal block type and current rated
to at least 5 amps.
OUTSIDE BOILER
INSIDE BOILER
7 8 9 10
Optional
Worcester
Programmer
11 12