Samsung RF267ABRS Service Manual page 55

TROUBLESHOOTING
Key control in option mode
Freezer/Power Freeze
Alarm/Lighting
Fridge/Power Cool
● If the display changes to option setting mode, all displays will be off except freezer and
fridge compartments temperature display as below.
(Fresh food and freezer compartments case will be explained only because all options
are operated with the same method according to the option table.)
1) For example, if you want to change freezer compartment standard temperature to 28.4℉(-
2°C) by operating option, do as below.
This function is for changing the standard temperature.
In -2℉(-19°C) of current temperature of freezer compartment, if you make the temperature
lower to 28.4℉(-2°C) by the option, the standard temperature would be controlled -6℉(-21°C)
Therefore, if you change the setting of temperature option to -2℉(-19°C) on the panel, the
appliance will be operated with -6℉(-21°C).
It means that standard temperature is controlled 28.4℉(-2°C) less than setting temperature in
the display.
Basically, option function has cleared data at shipping process.
Therefore, almost all setting value are "0".
Check the product information manual or specifications because setting value could be
NOTE
changed particularly for the purpose of improving product at mass producing process.
KEY control method after converting to option mode
Code Down
2¢ (-17¡ ) is recommended
Code Up Code
Energy Saver
2¢ (-17¡ ) is recommended
Code
Reference Value Down
38¢ (3¡ ) is recommended
Reference
Value
Code Down key
Code Up key
Reference Value down key
Reference Value Up key
38¢ (3¡ ) is recommended
Reference Value
54
Reference
Value Up