Samsung S19B370N User Manual page 47

Menu
PC/AV Mode
Key Repeat Time
Customized Key
Auto Source
Display Time
Menu Transparency
INFORMATION
Menu
INFORMATION
3-14
Set to PC when connected to a PC.
Set to AV when connected to an AV device.
• This function does not support Analog mode.
• Supplied for the wide models only such as 16:9 or 16:10.
• If the monitor (when set to DVI or HDMI) is in power saving mode or is displaying the
message <Check Signal Cable>, press the MENU button to display the On Screen Display
(OSD). You can select <PC> or <AV>.
Controls the repeat delay of a button.
You can set to <Acceleration>, <1 sec> or <2 sec>. If <No Repeat> is selected, the button only
responds once.
You can set the function of the Customized Key to one of the following.
• < Angle> - <
• <Auto> - The monitor automatically selects an input signal.
• <Manual> - Users have to manually select an input signal.
Not applicable to analog (D-SUB)-or-digital (DVI)-dedicated models.
The OSD automatically disappears if no action is taken by the user.
You can determine the time to wait before the OSD is hidden.
• <5 sec> - <10 sec> - <20 sec> - <200 sec>
You can select the transparency of the OSD.
• <Off> - <On>
Shows the frequency and resolution set on the PC.
For models with an Analog interface only, <Analog/DVI/HDMI> is not shown in the
<Information>.
Description
Bright> - <Eco Saving> - <Image Size>
Description
Using the product