Samsung UA40C7000 User Manual page 47

Account Login
For a application with multiple account, use ◄ and ► to
access the different account.
Login
User account:
Password:
✎
For a more enjoyable application experience, register
and log in to your account.
✎
For instructions on creating an account, refer to
Settings → Internet@TV ID → Create.
1. Press the Red button in Internet@TV home page.
2. Select desired User account, then press the ENTERE
button.
✎
If you want create account, press Red button;
then create account OSD window appear.
3. Enter the Password.
✎
When login succeeds, User account will be
displayed on the screen.
Setting up Internet@TV
¦
Settings
Create IDs and configure Internet@TV settings from this
screen. Highlight Settings using ▲ and ▼ buttons and press
the ENTERE button.
Settings
▪ System setup
▪ Ticker Autorun
▪ Internet@TV ID
▪ Channel Bound Service
▪ Service Manager
▪ Change the Service Lock password
▪ Properties
▪ Reset
admin
Create [0~9] Enter PIN R Cancel
: Off
: Off
R Return
■ System Setup
✎
Ticker Autorun may not be supported depending
on country.
Ticker Autorun (Off / On): Enable/disable ticker autorun
upon powering on the TV.
Channel Bound Service (Off / On): Some channels
support applications as an Internet data service, allowing
you to access the Internet service while watching TV.
✎
Only available if supported by the broadcaster.
Reset: Resets Internet@TV settings to factory default
settings.
Change the Service Lock password
✎
The default password set is "0-0-0-0."
✎
If you forget the password, press the following
sequence of remote control buttons to reset the
password to "0-0-0-0":
8 → 2 → 4 →
POWER
■ Internet@TV ID
You can use this menu when creating, deleting the
account. You can control your account including
contents site's account information.
✎
Account is only for internet@TV.
Create: Create an account and link it with desired
service applications.
✎
NOTE
x
Account will be made less than 10.
x
Maximum number of characters is 8.
Manager
– Service Site: Register login information for service
sites.
– Change Password: Change account password.
– Delete: Delete the account.
■ Service Manager: Delete and lock applications installed
to Internet@TV.
Lock: Lock the application.
✎
Accessing a locked application requires the
password.
Delete: Delete the application.
■ Properties: Display information about Internet@TV. Use
the Check the speed of your internet connection
option to test your network connection.
(off) → →
POWER MUTE
(on).
44
English