Using The Instant Replay Function - Samsung DVD-S221 User Manual

Using the Zoom & 3D Sound Functions
Using the Zoom Function (DVD/VCD)
Using the instant replay function (DVD)
1
1
During play or pause mode, press the
ZOOM button on the remote.
If you miss a scene, you can see it again using this
A square will be displayed on screen.
function.
2
2
Use the UP/DOWN or LEFT/RIGHT
1
If you press the I.REPLAY button, the current
1
buttons to select the part of the screen you
scene moves backward about 10 seconds,
want to zoom in on.
and plays back.
3
3
Press the ENTER button.
* Depending on the disc, the Instant Replay function
may not work.
- During DVD play, press ENTER to zoom in
2X/4X/2X/Normal in order.
- During VCD play, press ENTER to zoom in
2X/normal in order.
Using the 3D Sound Function
The simulated surround effect depends on the disc
contents. If you connect the unit to your stereo
system, you can enhance sound quality and
produce a greater surround effect.
This feature is useful when you are using the DVD
player with a two channel stereo through the
analog outputs.
(Discs which are recorded with LPCM or DTS will
not work. When the DIGITAL OUTPUT is set to BIT
STREAM in the SETUP MENU, the 3D Sound
function will not work.)
1
1
During play, press the 3D button.
The 3D SOUND mark will be displayed on
screen. (Be sure the DIGITAL OUTPUT is set to
PCM.)
2
2
Press the UP/DOWN buttons to turn the 3D
Sound feature on or off.
Downloaded From Disc-Player.com Samsung Manuals Downloaded From Disc-Player.com Samsung Manuals

Using the Instant Replay Function

• 3D Sound is possible only on discs
recorded using DOLBY SURROUND or
DOLBY DIGITAL. However, some of
these discs do not contain rear channel
sound signals.
• Depending on the disc, the Zoom and
3D Sound function may not work.
37 35