Lubrication; Steering System - MerCruiser 3.0 MPI Owner's Manual

Lubrication

Steering System

Incorrect cable lubrication can cause hydraulic lock, leading to serious injury or death
from loss of boat control. Completely retract the end of the steering cable before applying
lubricant.
NOTE: If steering cable does not have grease fitting, inner wire of cable cannot be greased.
1. If Steering Cable Has Grease Fittings: Turn steering wheel until steering cable is fully
retracted into cable housing. Apply approximately 3 pumps of grease from a typical
hand‑operated grease gun.
Tube Ref No.
2. Turn steering wheel until steering cable fully extended. Lightly lubricate the exposed
part of cable.
Tube Ref No.
90-899883272 MARCH 2008
a
a - Steering cable grease fitting
Description
Special Lubricant 101
34
a - Extended steering cable
Description
Special Lubricant 101
34
WARNING
!
6221
Where Used
Steering cable grease fitting
a
6222
Where Used
Steering cable
Section 5 - Maintenance
Part No.
92-802865Q02
Part No.
92-802865Q02
Page 67