Power Trim Does Not Operate (Motor Operates But Sterndrive Unit Does Not Move) - MerCruiser 3.0 MPI Owner's Manual

Loose or dirty electrical connections or damaged
wiring.

Power Trim Does Not Operate (Motor Operates but Sterndrive Unit Does Not Move)

Trim pump oil level low.
Drive unit binding in gimbal ring.
90-899883272 MARCH 2008
Possible Cause
Possible Cause
Section 7 - Troubleshooting
Remedy
Check all associated electrical connections and wires
(especially battery cables). Clean and tighten faulty
connection. Repair or replace wiring.
Remedy
Fill pump with oil.
Check for obstruction.
Page 101