Troubleshooting Guide - Sony SEQ-300 Service Manual

Before going through the check list below, first reter back to the connections and operating procedures.
Should any problem persist after you have made these checks, consult your nearest Sony service facility
Symflom Câ.ee
No audio even when the POWER
switch is turned on.
. The power cord is disconnected
o The connecting cord is disconnected.
e The TAPE switch setting is not correct.
No equalization
o The EQUALIZATION switch is set to OFF (the indicator is off),
o Connections are not made properly
The program source connected to the
amolifier cannot be recorded
o The TAPE switch is set to ON.
9-953-155-11
Sony Corporation
Audio Group
- t 4 -
Englidr
88C0296-1
Printed in Japan
01988.3
Published by A/V Enginæring Service Dept.