4. From the Testing menu, select GPS Control. This opens up
figure below, and enables the GPS.
Select Idle to confirm the GPS is enabled and is in idle mode; at this point all clocks should be present,
GPS_En_Reset & SleepX should be high, and Vdd_Dig, Vcc_TCXO & Vcc_PLL/VCO will be present.
Receiver On turns on all RF sections of the ASIC and so all LDOs will be on.
Page 3 –56
Figure 17 GPS Control dialogue box
COMPANY CONFIDENTIAL
Copyright © 2009 Nokia. All rights reserved.
GPS Control dialogue box, as shown in the
RX-51
BB Troubleshooting
Issue 1