Printing Panoramas From The Camera - HP Photosmart R967 User Manual

Chapter 5
1. Check that the printer is turned on, there is paper in the printer, and there are no
printer error messages.
2. Verify that the camera's USB Configuration is set to Digital Camera (see USB
Configuration under
3. Connect the dock and printer using the USB cable
that came with your camera.
4. Place the camera in the dock and turn on the
camera.
5. When the camera is connected to the printer, the
Print Setup Menu displays on the camera.
–
–
–
6.
Press

Printing panoramas from the camera

You can print panoramas stitched on the camera (see
on page
10 x 30 cm (4 x 12 in) paper. You can also print portions of still images as panoramas.
1. Follow Steps 1 to 4 under
that you have panorama paper in the printer.
2. When the Print Setup Menu displays on the camera, use
Images or press
3. In the Print Setup Menu, highlight Print Size:, use
press
4. In the Panorama Printing Menu, highlight an option.
–
–
–
–
5. When you are done printing, remove the camera from the dock.
40
Downloaded from ManualsCamera.com Manuals
Using the Setup Menu on page
To change the set of images you want to print,
use , then follow the on-camera
instructions.
To edit the selection, press
on-camera instructions.
To change other settings, use
camera to select a menu option, then use
setting.
to begin printing.
Note If you connect the camera to a non-HP printer and encounter problems
with printing, contact your printer manufacturer. HP does not provide customer
support for non-HP printers.
33) directly to PictBridge-certified HP printers capable of printing panoramas on
and follow the on-camera instructions to select a set of images.
.
Print as Shown—Prints the area shown within the green box.
Select Crop Area—Allows you to adjust the portion of the selected image to
print. To select the area, press
green box over the area, then press
Menu.
Skip This Image—Proceeds to the next image without printing the image
displayed.
Cancel—Exits the Panorama Printing Menu, cancels all pending and in-
progress print jobs, and returns to the Print Setup Menu.
, then follow the
on the
Printing images from the camera on page
, use
to return to the Panorama Printing
45).
on the camera to change the
Stitching panoramas
39, verifying
to select an option in
to select Panorama, then
, , , and to position the