Getting Started - Alcatel OneTouch Go Play 7048W User Manual

1�2

Getting started

1�2�1 Set up
Inserting or removing the SIM card/SD card
You must insert your SIM card to make phone calls. You do not need to
power off your phone before inserting or removing the SIM card as this
phone can support hot swap.
Before you install or remove the SIM card or microSD card, use a pin to
press the small cavity until the SIM/microSD cassette pops out.
Your phone only supports nano-SIM cards. Do not attempt to
insert other SIM types like mini or micro cards; otherwise this may
cause damage to your phone.
To avoid data loss and SD card damage, before removing the SD
card, ensure that the SD card is unmounted (Settings\Storage\
Unmount SD card).
19
Charging the battery
Connect the battery charger to your phone and wall socket respectively,
the LED indicator will light while charging.
• Make sure the battery is correctly inserted before connecting the
charger.
• When using your telephone for the first time, charge the battery fully
(approximately 3 hours).
You are advised to fully charge the battery (
indicated by a percentage displayed on screen while the phone is powered
off. The percentage increases as the phone is charged.
To reduce power consumption and energy waste when the battery
is fully charged, disconnect your charger from the plug; switch off
Wi-Fi, GPS, Bluetooth or background-running applications when
not in use; reduce the backlight time, etc.
1�2�2 Power on your phone
Hold down the Power key until the phone powers on, unlock your phone
(Slide, PIN, Password, or Pattern) if necessary and confirm. The Home
screen is displayed.
If you do not know your PIN code or if you have forgotten it, contact your
network operator. Do not leave your PIN code with your phone. Store this
information in a safe place when not in use.
). Charging status is
20