Datamax-ONeil A-Class Programmer's Manual page 92

Class series ii
Table of Contents

Advertisement

General WIFI Configuration Parameters – Identifier 'G'
The 'G' WIFI sub-group contains the configuration parameters that are generally common to ALL WIFI
radio modules used by Datamax-O'Neil. These configuration parameters are universally standard within
the WIFI realm and are interpreted commonly by the various WIFI radio modules. The 'Item-Value' pairs
within the 'G' sub-group of the 'WIFI' sub-group are defined by the following table:
Item
Number
1
DHCP Enable
2
Static Printer IP
Address
3
Static Printer
Subnet Mask
4
Static Printer
Default Gateway or
Router
5
MTU
6
Ad-Hoc Channel
7
Region Code
8
WEP Key Used
9
WEP Key 1
10
WEP Key 2
11
WEP Key 3
12
WEP Key 4
13
Pre-Shared Key or
PSK
14
LEAP Used ID
15
LEAP Password
16
EAP User ID
17
EAP Password
18
EAP Realm
19
SSID
20
WIFI Type
78
Extended System-Level Command Functions
Name
Available
to User
(Y/N)
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Y
Value Type
Boolean
Indicates if the DHCP Protocol is to
be used to automatically obtain all
required network addresses.
Formally known as IP Discovery.
String
Static IP Address for the Printer in
dotted decimal notation.
String
Static Subnet Mask for the Printer in
dotted decimal notation.
String
Static Default Gateway (Router) IP
Address in dotted decimal notation.
Decimal
Defines the Maximum Transmission
Unit size for the wired interface.
Defaults to the DEFAULT MTU from
the 'G' sub-group. Cannot exceed
the maximum ethernet packet size!!!
Decimal
WIFI Channel Number used when
operating in Peer-Peer (Ad-Hoc)
mode.
String
Two (2) character zero terminate
Region Code string, such as "US".
Decimal
A decimal number from 1 to 4 that
designates the WEP key used.
String
10 or 26 digit WEP Key 1
String
10 or 26 digit WEP Key 2
String
10 or 26 digit WEP Key 3
String
10 or 26 digit WEP Key 4
String
8 to 64 character Pre-Shared Key
used by WPA-PSK or WPA2-PSK
String
User ID String for LEAP (Cisco) EAP
Protocol.
String
Password String for LEAP (Cisco) EAP
Protocol.
String
User ID String for other EAP
Protocols.
String
Password String for other EAP
Protocols
String
Realm String for EAP Protocols that
utilize a Realm.
String
String that represents the SSID if in
Infrastructure mode.
Decimal
WIFI Module type (DPAC1=1,
SILEX=2, DPAC2=3)
Class Series 2 Programmer's Manual
Description

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents