Sony BDP-N460 Operating Instructions Manual page 45

®
Select "OK" or "Cancel," and press
ENTER.
Follow the on-screen instructions.
The HO indicator lights up when
outputting nOp/1 080i/l 080p video
sigrials.
"
• If
no picture appears after changing the
"Output Video Format" settings, hold down
• on the player for more than 10 seconds.
The video output resolution will be reset to
the lowest resolution.
• When connecting the HDMI OUT jack and
other video output jacks at the same time,
video signals may not output from the jacks.
other than from the HDMI OUT jack, when
"Auto" or "1080p" is selected (page 64).
When connecting other equipment at the
same time, press RETURN to return to step
2 and change the "TV Connection Method"
setting.
HOMI Resolution/Component Resolution
Auto (HOMI
Normally select this.
only)
The player outputs
signals starting from the
highest resolution
acceptable to the TV:
I080p > 1080i > nop
>
480p> 480i
If the resulting image
format is undesirable,
try another setting that
suits your TV.
480i Outputs 480i video
signals.
480p Outputs 480p video
signals.
720p
Outputs nop video
signals.
1080i Outputs 1080i video
signals.
1080p (HOM I Outputs 1080p video
only) signals.
Sets to output 1920 x 1080p124 Hz video
signals when playing film-based materials on
BO-ROMs (nOpl24 Hz or lO80p/24 Hz).
1920 x 1080p124 Hz video signals can be
output when all of the following conditions
are met.
- You connect a 1080124p-compatible TV
using the HOMI OUT jack,
- "Output Video Fonnat" is set to "HOMI,"
and
- "HOMI Resolution" is set to "Auto" or
"1080p."
Auto
Outputs 1920 x 1080p/
- -
24 Hz video signals only
when connecting a 1080/
24p-compatible TV using
the HOMI OUT jack.
On
Outputs 1920 x 1080p/
24 Hz video signals
regardless of the connected
TV type.
Off
Select this when your TV is
not compatible with 1080/
24p video signals.
"
No BD-ROM picture appears when the connected
TV is non-compatible with I080124p and "BD-
ROM I080/24p Output" is set to "On." In this case,
press HOME to display the home menu, and set
"BD-ROM I080/24p Output" to "Off."
Sets the color setting for video signals output
from the HOMI OUT jack. Select the setting
that matches the connected TV type.
Auto
Automatically detects the
- -
connected TV type, and
switches to the matching
color setting.
YCbCr (4:2:2)
Outputs YCbCr 4:2:2 video
signals.
YCbCr (4:4:4)
Outputs YCbCr 4:4:4 video
signals.
RGB
Outputs RGB video signals.
•
( I)
CD
-
= :
:::J
c=
en
l»
:::J
=-
>
S:
c
en
3"
CD
:::J
-
e n
-'continued
45