Philips HD7854 User Manual page 17

• You may have filled the milk container with
warm water to rinse the milk container unit.
Fill the milk reservoir with cold water.
There is some milk left in the milk container after
brewing a coffee variety with milk.
• It is normal that there is some milk left in the
milk container after you have brewed a coffee
variety with milk. This extra milk is required to
ensure high-quality frothed milk.
• Perhaps you filled the milk container beyond
the level required for the coffee variety you
wanted to brew.
• You may have used milk that is not cold enough.
If the milk temperature is above the 8°C, the
machine uses less milk. Make sure that you use
cold milk straight from the refrigerator (5-8°C).
The coffee varieties with milk are not hot enough.
• It is normal that a coffee variety with milk is
less hot than a cup of SENSEO
as the milk is heated to a lower temperature to
ensure high-quality frothed milk.
• You can preheat the cups with hot water to
keep the coffee hot longer. The best way to do
this is by pressing the 1-cup button q without
using a coffee pod.
• You may have used cups that are too large.
Large cups cause the coffee to get cold more
quickly. We advise you to use a 180ml cup for
cappuccino, a 260ml cup for latte macchiato
and a 220ml cup for caffè latte.
The SENSEO machine splatters when it brews a
®
coffee variety with milk.
• You may have used milk that is too warm. Make
sure that you use cold milk straight from the
refrigerator (5-8°C).
The CALC CLEAN indicator lights up continuously.
• The CALC CLEAN indicator goes on when
you need to descale the machine. This happens
after 1000 cups of SENSEO
250 cups of cappuccino, latte macchiato or
caffè latte have been brewed. To descale your
SENSEO
chapter 'Descaling'. The CALC CLEAN indicator
only goes out after the descaling procedure has
been performed correctly and the Calc-Clean
tool has been removed.
I pressed the CLEAN/CALC CLEAN button, but
the machine does not work.
• If you want to rinse the milk container unit,
make sure that you fill the milk container with
cold water and that you insert the milk
container unit properly into the machine.
• If you want to descale the machine, make sure
that the Calc-Clean tool is placed correctly.
black coffee, See chapter 'Descaling' for more details.
®
• Perhaps the machine is still heating up (the light
ring around the on/off button flashes slowly).
The machine needs some time to heat up
before descaling is possible.
The descaling cycle lasted only 5 minutes.
• The descaling cycle was probably interrupted.
This can have several causes: 1) You pressed
the on/off button during the descaling cycle 2)
You removed the water reservoir during the
descaling cycle 3) You did not place the Calc-
Clean tool correctly or removed it from the
machine during the descaling cycle.
• To restart the descaling procedure: 1) Remove
the Calc-Clean tool 2) Flush the machine by
pressing the 1-cup button q and the 2-cup
button qq briefly at the same time 3) Reinsert
the Calc-Clean tool and press the CLEAN/
CALC CLEAN button to start the descaling
procedure.
black coffee or
®
machine, follow the instructions in
®
17