Z K Utility; Pixel Mapping; Cleaning Mode; Ext. Wb Detect - Olympus E-600 Instruction Manual

Z K UTILITY

PIXEL MAPPING

CLEANING MODE

EXT. WB DETECT

You can disable the white balance sensor used to determine the light source during auto
white balance. This is useful when the light source near the sensor and the light source
illuminating the subject are different.

AF FOCUS ADJ.

You can use the AF sensor to fine-adjust the focusing position to a range of ±20 steps (–: closer,
+: toward )). Normally, there is no need to change this.
[SET AF DATA]
Fine-adjust the AF default value and register the setting. You can also register the
setting according to the lens.
[OFF]
AF focus adjustment is not performed.
[DEFAULT DATA]
Registers and applies all lens AF
adjustment values not registered
individually.
[LENS DATA]
Fine-adjusts the AF for each lens. You
register the adjustment values for up to 20
lenses.
8
x
Notes
• Depending on the adjustment made, the lens may not focus toward the ) or near side.
• When using a teleconverter, the teleconverter and lens are registered as a set.
• Only Four Thirds lenses can be registered.
[DATA LIST]
This displays the lens information registered with [LENS DATA] from [SET AF
DATA]. Select a lens from the list, and then check, delete, or edit the registration
information.
When the same lens is registered
multiple times, the adjustment
value for the lens with v is
applied.
104
EN
DATA LIST
1 14-42 F3.5-5.6
2 14-42 F3.5-5.6
1 12-60 F2.8-4.0
2 12-60 F2.8-4.0
1 50-200 F2.8-3.5
BACK SET
Select this to check, delete, or edit
the selected lens.
LENS DATA SET
No.1 No.1
14-42 F3.5-5.6 14-42 F3.5-5.6
S/N 000000000 S/N 000000000
EC00
S/N 888888888
T ±88
W ±88
CANCEL SET
Use fg to adjust.
Select which lens to use
when the same lens is
registered multiple times.
gP. 123
gP. 123
+20