Advertisement
Available languages
Available languages
CHOPPING & BLENDING
1.
Ensure the product is unplugged from the electrical outlet.
2.
Place the Base on a flat, level, stable surface.
3.
Fill the Small Cup or the Large Cup with the food that you wish to
chop/blend.
4.
Screw the Flat Blade assembly or Cross Blade assembly clockwise onto the
Small or Large Cup until secure.
NOTE: Ensure that the rubber gasket, located on the inside bottom edge of
the blade assembly, is in place. This will prevent leaking.
5.
Turn the Chopper Cup Assembly upside down so that the Blade assembly is
on the bottom. Attach the assembled Chopper by aligning the three tabs on
the outside of the Small or Large Cup with the three notches on the top
inner edge of the Base.
6.
Plug the product into a standard 120-volt AC electrical outlet.
7.
Each Cup Assembly has three small tabs which fit into three grooves on the
top lip of the Base. Press down on the Cup Assembly firmly and turn it
counter-clockwise to lock into place. Press and hold the Power Pulse switch
to operate. To prevent product overheating, limit continuous operation to
five seconds at a time. NOTE: The Cup Assembly MUST be locked in order
to operate.
8.
To stop processing, simply let go of the Power switch. Wait until the Blades
stop completely before removing the Cup Assembly by turning it clock-wise
to unlock it from the Base.
9.
Unplug the product from the electrical outlet when it is not in use or is left
unattended.
USING DRINKING CUPS:
1.
Ensure the product is unplugged from the electrical outlet.
2.
Place the Base on a flat, level, stable surface.
3.
Add the ingredients that you wish to include in your drink into one of the
Drinking Cups.
blade assembly.
4.
Screw the Cross Blade assembly onto the Drinking cup.
5.
Turn the Drinking cup so that the Blade assembly is on the bottom. Attach
the assembled Drinking cup by aligning the 3 tabs on the sides of the
Drinking cup with the 3 notches on the top inner edge of the Base.
6.
Plug the product into a standard 120-volt AC electrical outlet.
7.
Each Cup Assembly has 3 small tabs that fit into 3 grooves on the top lip of
the Base. Press down on the Cup Assembly firmly and turn it counter-
clockwise to lock into place. Press and hold the Power switch to operate.
To prevent product overheating, limit continuous operation to
five seconds at a time. NOTE: The Cup Assembly must be locked in order to
operate.
8.
To stop processing, simply let go of the Power switch. Wait until the Blades
stop completely before removing the Cup Assembly by turning it clock-wise
to unlock it from the Base. assembled Drinking cup and Blade assembly from
the Base. Turn the Drinking cup so that the Blade assembly is on top.
Unscrew the Blade assembly from the Drinking cup; screw one of the spill-
proof lids onto the threads on the top of the Drinking cup.
9.
Unplug the product from the electrical outlet when it is not in use.
If attached, remove the spill-proof lids before installing
4
Advertisement
