LENCO CR-2003 CR-2003 CR-2003 CR-2003 User Manual page 27

Manual Configuration
•
You can choose DHPC (which IP assigned automatically) or manually
input IP address for wireless network connection.
When you select manual setting for wired connection, the followings
have to be entered:
1. SSID (the name of Access Point);
2. IP Address;
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage
one network connection within an area.
Check Network when Power On
•
Enable / disable WiFi network.
When you enable the WiFi network, the system will automatically
search the available AP. Select you required AP.
Enter WEP or WPA code to connect the WiFi.
If the wireless network connection is not existed or failed, the icon at
the top left corner will have a cross on it.
Manage
Manage) specific network if you have setup more than Manage
27