LENCO CR-2003 CR-2003 CR-2003 CR-2003 User Manual page 14

The number of bars in the wireless symbol in front of the network name (SSID)
shows the relative signal strength of the network.
The key symbol indicates that the network is password-protected.
If the device does not find any wireless networks, No wireless Networks
Found appears on the display. Change your location, if necessary, and check
your WLAN router.
You can find the SSID of your Access Point in the configuration of the Access
Point (router).
Select your network and confirm with OK. If your WLAN is
password-protected, you will be prompted to enter your password.
Enter the password using the number and letter buttons of the remote
control or enter it directly on the device.
Note the use of upper and lower case when entering the password.
You can rotate reel to choose the code. If it is accidentally pressed � � � � to
move a redundant entry, press� � � � to correct.
With With Remote Remote
With With Remote Remote control:
The cursor indicates the current entry space.
Press the corresponding number button repeatedly:
0 0 (delete entry)
1 1 (space) @ ! " # $ % & ' ( ) * + , - . / : ; < = > ? [ \ ] ^ _ ` { | } ~
2 2 A B C a b c
control: control:
control:
14