Selector Lever - Chevrolet Low Cab Forward 2016 Manual

Selector Lever

Move the selector lever (2) to make
a shift into each gear position.
Diesel Engine Selector Lever
Gasoline Engine Selector Lever
P (Parking) : Used when the
vehicle is parked or when starting
the engine. The P position is to be
used with the parking brake. The P
and N positions are the two
positions in which the engine can be
started.
R (Reverse) : Used when backing
up the vehicle. Bring the truck to a
complete stop before moving the
selector to the R position.
N (Neutral) : Can be used when
starting the engine, but for safety,
get in the habit of starting the
Driving and Operating
engine in the P position. The N
position is used should it become
necessary to tow your truck.
D (Drive Diesel Engine Only) :
The D position is for all normal
forward driving. The system
automatically selects the gear
according to the vehicle speed.
Press the overdrive off switch (3) to
switch to the overdrive ON position
for greater fuel economy.
D6 (Drive D6 Gear Gasoline
Engine Only) : The D6 position is
for all normal forward driving. The
shifting of 1st - 2nd - 3rd - 4th - 5th -
6th takes place according to the
vehicle speed and accelerator pedal
pressing rate. It is recommended
that this range be used to improve
fuel economy and reduce vehicle
noise.
D4 (Drive D4 Gear Gasoline
Engine Only) : The D4 position is
when you feel shifting between 4th
and 5th troublesome while climbing
a long hill. Shifting of 1st - 2nd - 3rd
- 4th takes place according to the
vehicle speed and accelerator pedal
pressing rate.
207