Display Function; Setting The Clock - Samsung MM-D320 User Manual

DISPLAY function

ENG
You can view all functions available on the display, adjust the
brightness of the display.
Each time you press the DISPLAY button on the remote control, the
display mode will change as follows:
The Demo function
All functions available on the system appear on the front panel
display.
The Dimmer function
The Dimmer function is selected and the display darkens.
Display ON
The Display turns on.
Clock ON
The Clock you set is displayed.
DISPLAY DISPLAY
Downloaded From Disc-Player.com Samsung Manuals
10
CD REC
USB REC DISC SKIP
SPEED
CD
TIMER TIMER/CLOCK SLEEP

Setting the Clock

Your system is equipped with a clock which allows you to turn your
system on and off automatically.
You should set the clock:
When you first purchase the micro-compact system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing POWER.
2
Press TIMER/CLOCK twice.
Result: CLOCK is displayed.
3
Press ENTER ( ) .
Result: The hour flashes.
4
To... Press the TUNING/ALBUM button
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press ENTER (
Result: The minutes flash.
6
To... Press the TUNING/ALBUM button
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press (
Result: The clock starts and is displayed.
You can display the time, even when you are using another
function, by pressing TIMER/CLOCK once.
You can also use , buttons on the main unit to instead of .
TUNING/ALBUM button or
DISPLAY
SPEED
TIMER TIMER/CLOCK TIMER/CLOCK
ON/OFF
REPEAT REPEAT
SOUND
TUNING /ALBUM
TUNING /ALBUM
VOL
TUNING /ALBUM TUNING /ALBUM
MO/ST
USB REC
) .
) .
in step 4, 6.
USB REC DISC SKIP
CD
SLEEP
EQ
VOL
TUNING