PRINT-RESERVE (CARD)
You can store data for making prints with a printer or at a lab that
supports this system. (p. 88)
1
2
LCD monitor
RESET
NEXT
3
SET OK
1
Close the lens barrier and press
the Print button twice to display
the screen shown.
2
Select
(1-frame) or
(all-frame) using the +/–
buttons.
• Select
RESET to cancel all
of the selections.
• If the Print button is pressed
while the setting is being
entered, it will be canceled.
3
Press the OK button to save
the setting and display
the LCD monitor. With
frame), select another picture
using the +/– buttons until all
the selection is made.
• Pressing the OK button when
is displayed on the LCD
monitor
will
selection.
• If the LCD monitor ON/OFF
button is pressed while the
setting is being entered, it will
be canceled and the LCD
monitor will be turned off.
on
(1-
cancel
the
91