Operating Hour Notification System - Honda bf50d Owner's Manual

Operating Hour Notification
System
This outboard motor engine counts
the number of operating hours since
the last periodic maintenance. When
the next periodic maintenance is due,
the engine notifies the NMEA2000
network, and a maintenance
indication is displayed on an
NMEA2000-compatible device.
After periodic maintenance is
performed, reset the hour counter by:
1. Stopping the engine.
2. Setting the gearshift at F or R.
3. Turning the ignition switch ON.
The buzzer will sound once.
4. Pressing the emergency stop switch
5 times within 20 seconds.
The buzzer will sound once when
the hour counter is reset.
Periodic maintenance is required
when either the operating hours or the
time since last maintenance reaches
the prescribed limit. Therefore,
periodic maintenance may be
required based on the number of
months since the last maintenance
before the alert based on engine
operating hours displays (see
MAINTENANCE SCHEDULE on
page 73)
Reset the hour counter whenever
maintenance is performed, whether
based on the time interval or the
number of operating hours.
CONTROLS AND FEATURES
37