Operating The Electrical Adjustment Options - Handicare DX REM 420 User Manual

4

Operating the electrical adjustment options

Not every wheelchair has been equipped with electric adjustment options. We make a distinction
between four different adjustment options to the seating system:
• Tilt adjustments
• High/low adjustments
• Backrest adjustments
• Legrest adjustments
4.1 Selecting the desired adjustment option
1. Press the 'adjustment' button (E in fi gure 3) to select the 'adjustment options' mode. The
'adjustment option' mode starts with the seating function that was last selected. The LED light
indicates what electrical adjustment option is enabled (1, 2, 3 or 4).
2. Use the 'adjustment option' button or joystick to switch between the electrical adjustment options
('+' / right for the next seating function and '-' / left for the previous seating function).
3. Moving the joystick forwards and/or backwards will activate the selected electric adjustment option
(see table 4). Move the joystick forwards or backwards until the desired adjustment option has
been attained.
Tilt adjustment
High/low adjustments
Backrest adjustments
Legrest adjustments
Table 4
4. To return to the 'drive' mode: Press the 'speed regulator' button (F in fi gure 3).
Note: If you adjust the seat height by using the high/low option, the speed will be reduced due to
safety reasons.
Move joystick backwards
The entire chair will tilt
backwards
The entire chair will be raised
The backrest will tilt backwards
The legrest angle will increase,
the footplate will be raised
Operating the electrical adjustment options
Move joystick forwards
The entire chair will tilt forwards
The entire chair will be lowered
The backrest will tilt forwards
The legrest angle will decrease,
the footplate will be lowered
| 25