Dtv Setup; Pc Setup - Zenith L27W46 Operating Manual

Table of Contents

Advertisement

Installation

DTV Setup

DTV Setup
- To watch digitally broadcast programs, purchase and
connect a digital set-top box.
Connections
Connect the digital set-top box video outputs to the
COMPONENT (Y, P
, P
) jacks and connect the digital
B
R
set-top box audio outputs to the AUDIO jacks.
Viewing Setup
1. Turn on the digital set-top box. (Refer to the owner's
manual for the digital set-top box.)
2. Use the TV/VIDEO or MULTIMEDIA button on the
remote control to select Component 1.

PC Setup

PC Setup
- After setup, be sure to select RGB-PC source on TV.
Connections
1. Set the monitor output resolution on the PC before
connecting to the TV.
2. Connect the TV to the PC with the PC cable.
3. Connect the PC audio output to the TV's PC SOUND
input.
Viewing Setup
1. Turn on the PC.
2. Use the TV/VIDEO or MULTIMEDIA button on the
remote control to select PC.
Monitor Display Specifications
Horizontal
Resolution
Frequency(kHz)
640x480
800x600
1024x768
1280x768
1280x720
NOTES
a. For optimum picture quality, use standard VESA 1280x720 computer output at a 60Hz refresh rate (In some video cards,
this mode may not be supported.) . Using other formats (VGA, SVGA, etc.) or refresh rates may result in reduced picture
quality. (To change the computer video output format, please refer to the operating manual for the computer you are
using).
b. If the message "
Out of range
Specifications' chart above.
c. The synchronization input form for Horizontal and Vertical frequencies is separate.
DPM (Display Power Management) mode
If the PC goes to power saving mode, the monitor automatically switches to DPM mode.
If you don't use the PC cable provided, DPM mode may not work.
14
Vertical
Frequency(Hz)
31.47
60
35.00
66.67
37.50
75
35.16
56.25
37.88
60
48.08
72.19
46.88
75
48.36
60
56.48
70
60.02
75
60
47.78
60
44.70
" appears on the screen, adjust the PC output to a format listed in the 'Monitor Display
Y
P
B
DTV Receiver (Set-top Box)
NOTE
Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable)
from the DVI output socket of the PC to the DVI input socket of
the set when using a PC with DVI output. In some video cards,
DVI-Analog output may not be supported.
1
P
(R)
AUDIO
(L)
R

Advertisement

Table of Contents
loading

Table of Contents