Liko Uno 200 Instruction Manual
Hide thumbs Also See for Uno 200:

Advertisement

Uno 200 is a fully electric mobile lift, i.e., both raising
and lowering of the lift arm and width adjustment of the
base are done electrically. Uno is designed to be used
in most of the common lifting situations, for example
transfers between bed and wheelchair, to and from the
toilet and bathtub and for lifting to and from the floor.
Uno 200
has three alternative height settings to always
enable the optimal lifting height. The intermediate posi-
tion is the standard setting and is recommended in most
cases. The lowest position is appropriate, for example,
when lifting from the floor. The highest position is selec-
ted when there is a need for extra lifting height; e.g.,
when lifting to beds and gurneys that are not height-
adjustable.
In this document, the person being lifted is referred to as the "patient" and the person helping is referred to as
the "caregiver".
is a warning triangle used to warn of situations that demand extra care and attention.
IMPORTANT!
Read the instructions for both the patient lift and the lifting accessories before use. Lifting and transferring a
patient always involves a degree of risk. A complete understanding of the contents of instructions is essen-
tial, and only trained personnel should use the equipment. When in doubt, contact Liko.

Product Description

Unique for Uno 200 is the variable lifting range and
maximum load that is set by a number of adjustments.
These adjustments make it possible to optimize Uno for
different lifting needs.
In each case, assess the situation to determine how
many caregivers are needed to perform a safe and
ergonomically correct lifting and transferring operation.
Individual trial fitting and trial use of the sling and other
accessories is essential to ensure proper function and
safety during the use of the lift.
To ensure maximum safety for caregivers and patients,
Uno 200 is equipped for both mechanical and electrical
emergency lowering.
Uno 200™
Instruction Guide
English
7EN150105-03
2011-11-22
Applies to the following model:
Uno 200
Prod. No. 2010020

Advertisement

Table of Contents
loading

Summary of Contents for Liko Uno 200

  • Page 1: Product Description

    Read the instructions for both the patient lift and the lifting accessories before use. Lifting and transferring a patient always involves a degree of risk. A complete understanding of the contents of instructions is essen- tial, and only trained personnel should use the equipment. When in doubt, contact Liko.
  • Page 2: Table Of Contents

    • the lift is set for the correct max. load. Never leave a patient unattended in a lifting situation Uno 200 is tested by an accredited testing institute and comply with the requirements of the directives for medical- technical Class 1 products (MDD 93/42/EEC).
  • Page 3: Definitions

    200 kg (440 lbs) The device is intended for indoor use. 42 dB(A) Sound level: Type B degree of protection against electrical IP X4 Protection class: shock. Expected life time: Class II equipment. 10 years Uno 200 • 7EN150105-03 www .liko. com...
  • Page 4: Measurements

    Measurements Side view Ref. 1 F F1 Maximum reach of lift arm Top view Ref. 2 Maximum reach of lift arm www. liko. com Uno 200 • 7EN150105-03...
  • Page 5 * Measures vary depending on height setting level, see "Assembly" page 6. NOTE! The measures apply for a lift equipped with standard sling bar and standard wheels. Before changing lifting equipment or wheels, ensure that the lift still achieves the desired lifting height. ** Reference measurements according to Standard EN ISO10535:2007. Uno 200 • 7EN150105-03 www .liko. com...
  • Page 6: Assembly

    Adjust the position of the handles Press the cable cover up into - Hand control to socket 3. so that they point downward. position. Use a screwdriver to secure the cable cover with the accompanying screws (2 pcs). www. liko. com Uno 200 • 7EN150105-03...
  • Page 7: Operation

    (up/down) when the hand control is held as Turn the button in the direction of the arrows. illustrated. For base-width adjustment, press either of the two lower push-buttons: wider narrower The movement stops when you release the buttons. Uno 200 • 7EN150105-03 www .liko. com...
  • Page 8 NOTE! The quick reference guide does not replace the lift's instruction guide. www. liko. com Uno 200 • 7EN150105-03...
  • Page 9: Adjustments

    (2). See " Table of measurements", page 5. If this adjustment not is sufficient, see "Adjustment of lifting height - Via the lower lift motor attachment", page. 9. Uno 200 • 7EN150105-03 www .liko. com...
  • Page 10: Charging The Batteries

    Note! The lift does not operate when the charger cable is plugged into an electric socket. Old batteries are to be left at the nearest recycling station or given to personnel authorized by Liko. www. liko. com Uno 200 • 7EN150105-03...
  • Page 11: Maximum Load

    For the total lift system, the lowest max. allowable load indicated for the respective products on the system always applies. For example: An Uno 200 that is approved for 160 kg (350 lbs)/200 kg (440 lbs) may be equipped with a lifting accessory that is approved for 300 kg (660 lbs).
  • Page 12 Liko for more information on the advantages and use of the Quick-release Hook system. Scale In need of weighing persons in combination with Uno 200 we recommend LikoScale 350 (Adapter 12 mm is required). Max. load 350 kg (770 lbs).
  • Page 13: Simple Troubleshooting

    (page 8). 4. Check that the battery is charged (p.10). 5. If the lift still does not work satisfactorily, contact Liko. If you hear unusual sounds. Contact Liko. Uno 200 • 7EN150105-03 www .liko. com...
  • Page 14: Care And Maintenance

    The lift should not be exposed to running water. Service Uno 200 must be inspected at least once per year, with particular attention to parts that are subject to wear. Repairs and maintenance may only be carried out in accordance with Liko service manuals, by authorized Liko service personnel and using original Liko spare parts.

Table of Contents