Pioneer DVH-P4100UB Installation Manual page 5

Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
IP-BUS input
(Blue)
Antenna jack
Downloaded from Caradio-Manual.com Manuals
This product
Yellow/black
If you use an equipment with Mute function, wire
this lead to the Audio Mute lead on that equipment.
If not, keep the Audio Mute lead free of any
connections.
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (6*)
The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and
7* when Pin 5 is an antenna control type. In
another type of vehicle, never connect 6* and 7*.
Blue/white (7*)
Connect to auto-antenna
relay control terminal
(max. 300 mA 12 V DC).
4