Casio QV-2400UX User Manual page 46

4.
Menu Scre
Select and ch
set the curren
Using AC Power Removing a Memory Card from the Camera To power save settings Memory Card Precautions The following examples show how alkaline battery life
Using the Bundled Accessories Power Requirements
changes under different conditions.
• Images cannot be recorded with this camera unless a Use the adaptor as shown below to power the camera from a
Your camera features a two-way power supply that lets you Pressing MENU displays the menu screen. The contents of
photographic conditions
1.
1. Turn on the camera and slide the REC/PLAY
Using the Lens Cap Open the memory card
household power outlet. memory card is installed in it.
use either AA-size batteries or household AC current. the menu screen depend on whether you are in the PLAY
selector to "REC".
slot cover.
A set of AA-size alkaline batteries is supplied with the cam- mode or REC mode. The following procedure shows opera- Example 1: Intermittent use of the camera shortens battery
• Be sure to use only CASIO brand CompactFlash cards.
Always keep the lens cap on the lens whenever you are not
era. The other items listed below are available separately. tion in the REC mode as an example.
life.
Proper operation with other memory cards is not guaran-
using the camera.
2.
Press MENU.
teed.
Green
Batteries
Conditions
marker
Large loop
1.
3.
• Static electricity, electrical noise, and other electrical phe- Slide the POWER ON/OFF switch to the right to
Use [+] (down) and [–] (up) to select "FUNC-
• Four AA-size alkaline batteries: LR6
• Temperature: 25 C
nomena can cause corruption or even total loss of the data
• Four AA-size lithium batteries: FR6 turn on the camera. • Repeat of a cycle of recording of one shot per minute
TION", and then press the shutter release but-
2.
Press the eject button AC Adaptor
stored on a memory card. Because of this, you should al-
• Four AA-size nickel metal hydride rechargeable batteries:
for 10 minutes, followed by one minute of playback,
ton.
2. so it extends from the
ways make backup copies of important images on other
NP-H3 Slide the REC/PLAY selector to "REC".
and a nine minutes of power off (power on, full lens
media (magnetic optical disk, floppy diskette, computer
camera.
4. extention, half lens contraction, full lens extension,
Use [+] (down) and [–] (up) to select the item
• To perform a menu operation in the PLAY mode, slide
Household Current
Shutter release button: Moves the green marker.
hard disk, etc.).
image recording, power off)
whose settings you want to change, and then
the REC/PLAY selector to "PLAY".
• AC Adaptor: AD-C620
• Flash on
[+] / [–]: Increases and decreases the currently selected
• Memory card problems can be corrected by reformatting
press the shutter release button.
• AC Adaptor/Charger: BC-3HA
Approximate Battery Life: 50 minutes (46 shots)
digit.
3.
the memory card. Reformatting a memory card deletes all
Press MENU.
Ring
• To make auto power off settings, select "Auto Power
images stored on the card, but you can use a computer to
Off".
5.
Press to apply your settings.
4.
Loading Batteries
Example 2: Low temperatures shorten battery life.
copy the images you want to keep to the computer's hard Use [+] and [–] to select the item you want, and
• AC Adaptor: AD-C620 (Option)
Cap holder
3.
Press the eject button
• To make sleep settings, select "Sleep".
disk before reformatting your card. If you plan to be record-
then press the shutter release button.
Make sure that camera power is turned off whenever loading 6.
Conditions
Press to exit this setting screen.
once again to eject the
• AC Adaptor/Charger: BC-3HA (Option)
ing images where you do not have access to a computer, it
or replacing batteries. 5. • Make setting in accordance with the guidance mes- • Temperature: 0 C
On the screen that appears, use [+] and [–] to
The BC-3HA functions both as an AC adaptor and as a
card.
is a good idea to take along an extra memory card or two
Attach the lens cap holder to the ring. This protects against
sages that appear on the monitor screen.
• Repeat of a cycle of recording of one shot per minute
charger unit for AA-size nickel metal hydride batteries. It
make the setting you want, and then press the
just in case you experience an unexpected memory card
accidental loss of the lens cap.
for 10 minutes, followed by one minute of playback,
comes complete with four rechargeable nickel metal hy- [+] [–]: Item selection, page scrolling
problem. shutter release button.
and a nine minutes of power off (power on, full lens
dride batteries. This AC adaptor/charger unit can be used
Shutter release button: Applies displayed setting
QV-2400UX Users
4.
Auto power off settings: "2 min" "5 min"
Remove the memory
extention, half lens contraction, full lens extension,
with any household power outlet rated for 100V to 240V
• Be sure to turn off camera power and let the lens retract
MENU: Returns to previous screen
image recording, power off)
card. Sleep settings: "Off" "30 sec" "1 min" "2 min"
AC.
into the camera before attaching the lens cap.
• Flash on
• Never turn on camera power with the lens cap affixed to the
Approximate Battery Life: 12 minutes (11 shots)
lens.
Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals
GETTING ACQUAINTED
shooting conditions
DC IN 6V
(AC power terminal)
Small loop
Eject button
5. 1.
While Close t
AC Ad
slot co lease b
compa
bottom
slide th
tion in
Selecting the Date Format Example Displays • Formatting is recommended for any memory card that you Attaching the Strap About rechargeable batteries • In the PLAY mode, Auto Power Off trigger time is fixed
Use only the nickel-metal hydride batteries (NP-H3) that are suspect contains corrupted image data (due to a DECODE at five minutes.
in the n
• Never use an electrical outlet whose voltage is
You can use the following procedure to select one of the Attach the strap as shown in the illustration below.
available from your dealer as options for this camera. Proper ERROR, strange image colors, malformed images) or
and op
• Sleep is disabled in the PLAY mode.
outside the rating marked on the AC adaptor.
IMPOR
three different date formats.
camera operation is not guaranteed when other recharge- newly purchased memory cards.
Doing so can create the danger of fire or elec-
2. • Performing any button operation while the monitor is
able batteries are used.
IBM M
• Before starting a format operation, load a full set of new trical shock. Use only the optional AC adaptor
asleep immediately wakes it up and restores normal
1. AC Adaptor/Charger : BC-3HA
Turn on the camera, and then use the REC/ Load b
batteries (alkaline or lithium) into the camera or connect specified for this camera.
operation.
Nickel-metal hydride batteries (4-battery set)/Quick
PLAY selector to select either "REC" or
the AC adaptor to power the camera. Interruption of cam- • Do not allow the AC adaptor power cord to be-
• The Auto Power Off setting is given priority if you have
Charger Set : BC-1HB4
era power during the format operation results in improper "PLAY". come cut or damaged, do not place heavy ob-
"2 min" set for both Sleep and Auto Power Off. This
Nickel-metal hydride batteries (4-battery set) : NP-H3P4
formatting, making it impossible to use the memory card. jects on it, and keep it away from heat. A dam-
• Insert only memory cards into the memory card slot.
means that the camera turns off if you do not perform
2.
aged power cord creates the risk of fire and
Press MENU.
Inserting any other type of card can cause malfunc- any operation for about two minutes in the REC mode.
IMPORTANT!
electrical shock.
tion.
• Auto Power Off is automatically disabled when under
On-screen guidance
3.
• Never try to modify the AC adaptor power cord,
Select "Date Style" using one of the following
• Be sure to keep all four batteries together as a set at
• Should water or any other foreign matter get into the
/ ends facing as
any one of the following conditions.
or subject it to severe bending, twisting, or pull-
all times, for both charging and powering the camera.
two key operations, and then press the shutter
Compatibility of the camera with the IBM microdrive has
memory card slot, immediately turn off power, unplug
shown in the nearby
REC mode FUNCTION menu, page 2
ing. Doing so creates the risk of fire and elec-
Mixing batteries from different sets can shorten overall — While a slideshow is playing
been confirmed by CASIO. However, you should note the
release button.
the AC adaptor, and contact your original retailer or
CAUTION illustration.
trical shock.
IMPORTANT!
battery life and cause malfunction of the camera.
following important points whenever using the IBM
— When you are performing operations on a com-
nearest CASIO Service Provider.
• Never touch the AC adaptor while your hands
• Rechargeable batteries cannot be charged while they
If you are here
microdrive. • Be sure to keep the strap around your wrist when us-
puter, printer, or other external device connected
• Never eject the CompactFlash card while the card slot
are wet. Doing so creates the risk of electrical
are loaded in the camera.
ing the camera to protect against accidentally drop- REC mode
to the camera's DIGITAL terminal or USB port.
is facing downwards. Doing so creates the danger of
3.
While holding down the
shock.
• Be sure to carefully read all of the documentation that
ping it.
the CompactFlash card falling, which can corrupt im- PLAY mode
— While the AC adaptor is connected to the camera
release button, slide the • Do not overload extension cords or wall out-
comes with the microdrive before using it. • The supplied strap is intended for use with this camera
age data on the card.
lets. Doing so creates the danger of fire and
battery compartment
• Note that the microdrive becomes hot during normal use. • Use [+] and [–] to select each menu item, and press
only. Do not use it for any other application.
• Never remove the memory card from the camera
electrical shock.
the shutter release button to advance to the next
Take care when removing it from the camera. cover back to its original
• Never swing the camera around by the strap.
while the operation lamp or card access lamp is flash-
• Should the cord of the AC adaptor become
menu.
• Take care to avoid strong pressure on the label side of the
position to close it.
ing. Doing so can cause loss of recorded images or
On-screen guidance
damaged (exposed internal wiring), request a
microdrive when it is removed from the camera. Strong
corruption of memory card data.
replacement from an authorized CASIO ser-
pressure can damage internal components and cause mal-
vice provider. A damaged AC adaptor cord
IMPORTANT! • Pressing the
function.
certain setting screens. creates the danger of fire or electrical shock.
• Never use manganese batteries. Use only the battery
• See the "Camera Menus" on page E-146 for more informa-
types specifically mentioned in this User's Guide.
tion about menu contents.
E-30
PUSH
REC mode, page 1
Items
Select this on the menu screen
"FUNCTION" "SET UP"
Items
"SET UP" "Date Style"
button is sometimes required to exit
"Date Style"