Casio QV-2400UX User Manual page 26

Lens Precau
Installing a Conversion Lens Terminals and Ports Screen when SHIFT INFO is pressed
Operation Indicator Lamp
Pressing SHIFT INFO also
Optionally available conversion lenses change the focal dis-
• Fingerprints, dust, or any other soiling of the lens can inter-
The Operation lamp shows the operational status of the
displays the FUNCTION menu
tance, which provides enhanced telephoto or wide-angle ca-
fere with proper image recording. Never touch the lens with
camera as described below.
(page E-95).
pabilities. The method you should use to install a conversion
your fingers. You can remove dust particles from the lens
VIDEO OUT terminal
lens depends on your camera model.
surface by using a lens blower to blow them off. Next, wipe
(page E-126)
• QV-2400UX: You must install an optionally available lens
the surface of the lens with a soft lens cloth.
adaptor (LU-8A) in order to use a conversion lens.
• The lens of the QV-2400UX extends from its body when
SHIFT
• QV-2900UX: A conversion lens can be installed directly,
Metering Mode indicator
you turn on power and retracts when you turn off power.
INFO
without an adaptor.
(multi)
Take care not to subject the lens to undue force or impact,
• Tele Conversion Lens LU-8T: 1.5X
(center)
and never set the camera face down so the lens is in con-
• Focusing distance when installed
tact with a tabletop, etc. Be sure to remove the lens cap (spot)
QV-2400UX: Approximately 1m to
Operation lamp
USB
before turning on the camera. If you turn on the QV-
QV-2900UX: Approximately 2.5m to
2400UX while the REC/PLAY selector is set to "REC" and
its lens cap is attached, the message "LENS CAP!" ap-
pears on the monitor screen and power turns off automati-
Tele
cally. If this happens, remove the lens cap and then turn on
Conversion
USB port
power. Lens (LU-8T)
(page E-126)
• Never remove the batteries from the QV-2400UX or unplug
its AC adaptor while the lens is extended. Doing so leaves
Conversion
the lens extended, and creates the risk of lens damage.
Lens Adaptor
Open Terminal Panel Cover
(LU-8A)
Exposure Mode indicator
(program AE)
(aperture priority AE)
(shutter speed priority AE)
(manual)
QV-2400UX
Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals Downloaded from ManualsCamera.com Manuals
GETTING GETTING GETTING GETTING
GETTING ACQUAINTED
Terminal Panel
SHIFT
MF
Cover
(page E-20)
INFO RESIZE
DIGITAL terminal
SHIFT INFO button
(page E-126)
MF
RESIZE
VIDEO OUT DIGITAL
DC IN 6V
DC IN 6V terminal
(page E-36)
White balance
(Auto)
(Daylight)
(Shade)
(Tungsten)
(Fluorescent)
(Manual)
QV-2900UX
REC m
PLAY mode • Wide Conversion Lens LU-8W: 0.7X Bottom
• Focusing distance when installed
Lamp
QV-2400UX/QV-2900UX: Approximately 1cm to
Color
Green Auto focus operation
Tripod screw hole
complete
Image protection indicator
Monitor screen
turned off due to
sleep state activation
Battery
Battery compart-
QV-2400UX
capacity
ment cover
Amber Exposure warning
(page E-32)
IMPORTANT!
Red Cannot focus
• Be sure to use the Conversion Lens Adaptor when-
Memory full
ever you install a conversion lens. If you don't, the
The above indicators do not appear on the PLAY mode
lens will come into contact with the conversion lens
monitor screen when the "Indicators" option is turned off
Data save error
when it extends from the camera, resulting in malfunc-
(page E-123).
tion. (QV-2400UX only)
• The camera is ready to record when the lamp is off.
• Flash is disabled while a conversion lens is being
used.
E-20
On Flashing
Release button
Folder name
Please Wait
Wide
(page E-32)
(after power on)
Conversion
File number
Lens (LU-8W)
Image store operation in
progress
Conversion
Movie store operation in
Lens Adaptor
progress
(LU-8A)
Self-timer countdown in
PUSH OPEN
progress
Low battery
Format operation in
progress
Please Wait
QV-2900UX
(after power off)
Flash is charging.
Memory card error
Memory card is not
formatted
Cannot charge the flash
Image size
Quality
Date/Time