SURROUND Mode Settings
wmm
You can enjoy surround sounds while
playing discs including Dolby Digital DVDs,
even if you have only 2 or 4 speakers Select
surround mode that best suits your speaker
setup
SURROUND
DISPLAY
*I+
ENTER
1
Press DISPLAY during playback
The Control Menu appears
2
Press */+ to select
(SURROUND), then press ENTER.
The options for SURROUND
appear
3
Press W
to select one of the
SURROUND sounds
Refer to the following
explanations
given for each item
For 2 speaker setups
*TVS DYNAMIC
*TVS WIDE
*TVS NIGHT
*TVS STANDARD
For 4 (or more) speaker setups
(If you select "NONE"
in the setting of
"REAR'
in "SPEAKER
SETUP"(page
72), you cannot select these modes )
*NORMAL
SURROUND
*ENHANCED
SURROUND
*VIRTUAL
REAR SHIFT
*VIRTUAL
MULTI REAR
*VIRTUAL
MULTI DIMENSION
4
Press ENTER.
To cancel
the setting
Select "OFF" in Step 3
To turn off the Control
Menu
Press DISPLAY
repeatedly until the Control
Menu is turned off
When you connect only 2 front speakers,
TVS (TV Virtual Surround) lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers (L: left, R:
right) without using actual rear speakers
Select one of the following
modes:
50