Advertisement
Quick Links
Wireless Vibrating Receiver
• For use with RA-4961 series receivers
• Connect up to 4 wireless transmitter
accessories
• Audible, visual, and physical alert via built-
in speaker and vibration
RA-4961-VPQ
Manual
• Belt clip and small size for easy
• Each channel independently
®
portability
programmable
Advertisement
Summary of Contents for CBA RA-4961-VPQ
- Page 1 ® RA-4961-VPQ Wireless Vibrating Receiver Manual • For use with RA-4961 series receivers • Belt clip and small size for easy portability • Connect up to 4 wireless transmitter accessories • Each channel independently programmable • Audible, visual, and physical alert via built-...
-
Page 2: Specifications
CBA Wireless Vibrating Receiver Specifications: Model number RA-4961-VPQ Frequency 914.8MHz Channels Power supply 2x AA Batteries (Not included) Current Standby draw 80mA Estimated battery life 60 days (3 triggers/day) Receiver low battery indicator Receiver beeps every 5 seconds Accessory low battery indicator... - Page 3 CBA Wireless Vibrating Receiver Installation: For Wall Mounting 1. Hold the receiver unit against the wall to get an idea of where the receiver should be installed. 2. Install 1 nail (not included) on the wall. Belt clip tab 3. Hang the receiver on the nail.
-
Page 4: Replacing The Batteries
CBA Wireless Vibrating Receiver Replacing the Batteries: 1. Remove the battery cover. 2. Place 2x AA batteries (not included) Battery cover in the battery compartment, making sure to observe correct polarity. 3. Replace the cover. Battery compartment Also Available from SECO-LARM:...