Table of Contents
Advertisement
Picture quality problems
Status
Picture is not clear
Picture is too dark
Picture is too light
www.kodak.com/go/support
Downloaded from
www.Manualslib.com
Solution
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
Clean the lens
■
Place the camera on a flat, steady surface or use a tripod (especially
in high-zoom settings or in low light).
■
Use a larger picture size
■
If you're manually adjusting the ISO speed, realize that a high ISO
setting may cause grainy pictures
■
Reposition the camera for more available light.
■
Use Fill flash
so light is not behind the subject, or use the Backlight SCN mode.
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, increase the Exposure Compensation
page
16).
■
Reposition the camera to reduce the amount of available light.
■
Turn the flash off
■
Move so that the distance between you and the subject is within the
effective flash range. (See Specifications starting on
■
To automatically set exposure and focus, press the Shutter button
halfway. When the framing marks turn green, press the Shutter
button completely down to take the picture.
■
In Program mode, decrease the Exposure Compensation
page
16).
manuals search engine
(see page
51).
(see page
(see page
(see page
13) in Program mode, change your position
(see page
13).
Troubleshooting
40).
16).
page
(see
page
(see
49.)
49.)
47
Advertisement
Table of Contents
