Advertisement
Driver must use extra caution approaching fallen rider and keep
eye contact on fallen rider at all times.
Put the boat in neutral when near a fallen rider. Turn the
engine off when people are getting in or out of the boat, or
while in the water near the boat.
Do not operate watercraft or ride under the influence of alcohol
of drugs.
Inflating Instructions
CAUTION: DO NOT OVER-INFLATE. Use of an air compressor or over-
inflation can rupture the tube beyond repair, thus voiding the warranty.
Step 1
Lay the Ravenger Plus on a flat surface. Make sure there are no
sharp objects under the product that might puncture the tube.
Step 2
Remove the fiberboard insert from the rooster tail device.
Note: It is highly recommended that you keep this insert to
place back into the rooster tail device during storage. Doing so
will help maintain the shape of the device.
Step 3
Locate the clear stem valves for the floors. Inflate floors first.
NOTE: Moisten the plug of the clear stem valve prior to
inserting into the valve and push plug down into the valve body
fully.
Step 4
Locate the clear stem valves for the headrests. Inflate headrests
second, making sure nylon cover is pulled down and fitted securely
Advertisement
