Samsung NP-R620E User Manual page 136

Configuring the McAfee Firewall
The McAfee Firewall is configured for the product when
purchasing the product in order to protect the computer
from viruses. However, if the firewall is activated, you may
not connect to the network or the Internet properly. In this
case, you have to change the settings as follows.
Method 1) When you need to select Allow Access
in the Server or Internet Access Request
window.
When you connect to a bank, stock market, or gaming
website, an access request window appears. In this case,
select Allow Access in the window and click OK. Then
you can install the program normally or open the page.
Method 2) When you need to deactivate the
Firewall
If you cannot connect to the Internet when using a
broadband Internet service, you can connect to the
Internal normally if you disable the McAfee Firewall.
However, since it may cause a security problem, be
careful when doing so.
 Double-click the McAfee Security Center icon
from the Desktop.
 C lick the Advanced menu at the bottom left and
click Configure > Internet&Network.
 Turn the Internet&Network at the right to Off, set
the Select when to re-enable firewall to Never
and then click OK.
 C lick Home in the left menu pane and click Ignore
next to the 'Firewall protection is disabled'
message.
It is recommended activating the Windows
Firewall for your computer's safety when you
have disabled the McAfee Firewall. To activate
the Windows Firewall, click Start > Control
Panel>Security>Turn Windows Firewall on
or off> On(recommended) (When your Control
Panel is set to the 'Classic View' of Windows Vista
or when you are using Windows XP, click Start >
Control Panel > Windows Firewall > Change
Settings > On(recommended).)
13