Table of Contents
Advertisement
DISPLAY AND CONTROL OVERVIEW
Upper control panel
r - - - - - - - - - -
VOL (-)/(+)
, . . - - - - - - - CH (V)/(A)
....----- MENU
...---- TV/VIDEO
MAIN POWER
To change the vertical
angle of the LCD TV set,
tilt the screen up to 2.5
degrees forward or 10
degrees backward. The
TV set can also be
rotated 25 degrees
horizontally. Adjust the
angle so that the TV set
can be watched most
comfortably.
OPC sensor
Remote control sensor _ _
.....lI
HEADPHONE jack
Plug the headphone mini-plug into the HEADPHONE
jack located on the front of the TV set.
OPC indicator (Optical Picture Control)
The Optical Picture Control indicator lights up green
when the BRIGHTNESS is set to AUTO. (See page 27.)
'----- POWER indicator
A green indicator lights when the power is on and a red
indicator lights when in the standby mode (the indicator
will not light when the main power is off).
*
The examples used throughout this manual are based
on the LC-20S2U model.
I
I
NOTE
>
• TV/VIDEO, CH (V)/(A), VOL (-)/(+), and MENU on the main unit have the same functions as the same buttons
on the remote control. Basically, this operation manual provides a description based on operation with the remote
control.
Advertisement
Table of Contents
