Samsung SGH-G810 Servise Manual page 13

Exploded View and Parts List
9
1) Put main keypad to the pointed area
1) Be careful not to make scratch and molding damage!
2) Check the screw torque (1.0~ 1.2 Kgf.Cm)
11
1) Put the main-PBA on 4 screw hole
1) Be careful not to make scratch and molding damage!
2) Be careful to make sure that FPCB doesn't be
separated from the main PBA
This Document can not be used without Samsung's authorization
SAMSUNG Proprietary-Contents may change without notice
10
1) Combine slide FPCB and main PBA
1) Be careful not to make scratch and molding damage!
12
1)
Combine camera connetor
2) Put the camera module to the front case
1) Be careful not to make scratch and molding damage!
7-7