Samsung SGH-G810 Servise Manual page 12

5
1) Put SUB KEYPAD on the upper case (red)
1) Be careful not to make scratch and molding damage!
2) Be careful not to make any scratch to the FPCB
7
1) Combine slide upper and lower case.
1) Be careful not to make scratch and molding damage!
2) Put the lower part of lower case to the upper's hook,
first. (red)
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
6
1) Put the sub PBA considering sub hook
and put LCD to main window
2) Attach insulation tape (red)
1)Attach the tape based on the besel guide line
8
1) Fasten a screw at 4 points with driver
after slide up
1) Be careful not to make scratch and molding damage!
2) Check the screw TORQUE (1.0~ 1.2 Kgf.Cm)
7-6
Exploded View and Parts List