Table of Contents
Advertisement
Main Unit
Figure 13: Main unit installation.
When installing the in-vehicle phone avoid positioning the
main unit where it may disrupt the proper operation of the
vehicle and/or its components, such as car stereo, air bags,
cubbyhole, glove compartment, ashtray, lighter, gear stick,
hand brake, etc.
Attach the base connector to a stationary surface of the car
using the 4 screws and 4 washers. Make sure the main unit
is attached in a way that is both safe and convenient for the
driver or passengers to use. You may use the flexible bracket
to achieve optimal positioning of the main unit.
Warning: Do not position the main unit in front of the air bag
or where it may impair air bag performance, as the air bag
might inflate in an accident and cause damage.
Verify that the control unit does not face the sun or source of
humidity, such as air conditioner vents.
When the phone is powered off, insert the SIM into the
socket at the right side of the phone.
72 – Installation Guide
Advertisement
Table of Contents
