Connections; Poe-Cable Setup Diagram - Accelerated Concepts NetReach Troubleshooting Manual

Connections

If a NetReach device is not working properly, first ensure that the unit has proper connections.
The following needs to be connected to the NetReach:

Ethernet Cable -

Power -
The NetReach only operates with one supply of power. DO NOT supply power to
the device with both the PoE cable and the 12-volt AC wall wart!
SMA Connector
Wrong Ethernet Port
Correct Ethernet Port

PoE-cable setup diagram

5 of 11
NetReach Troubleshooting Guide
an Ethernet cable is connected between the LAN Ethernet port of the
NetReach and the client router. If the site is using the PoE cable, refer
to the PoE cable setup diagram.
power is supplied by either the 12-volt AC wall wart or the PoE cable.
Power Port
Connect Ethernet Here
To client router
To NetReach
Accelerated Concepts, Inc. © 2013