JVC GZ-MIG670 Instructions Manual page 5

Select [ON] if daylight
saving time is effective
Select the city closest to
the area where you use
the camcorder
o
Set the date and time
Touch sensor: Sets the date and time
-+: Moves the cursor to the right
OK: Clock starts
LCD monitor
• When the message disappears. press the
power button for at least 2 seconds to turn
off the power, and then press it again for at
least 2 seconds.
• Touch the sensors with your finger. The
sensors do not function if you touch them
with your finger nail or with gloves on.
Power button -~..."..-~
Daten-ime Setting
f)
Select [YES] within
10 ~seconds
Slide your finger up and down on the
sensor. Then touch OK.
e
Select [CLOCK SETTING]
O
Oplen the LCD monitor to
turn on the camcorder