Dubbing Files To A Vcr/Dvd Recorder - JVC GZ-MIG670 Instructions Manual

Copyi ng Fi les
(Continued)
Dubbing Files to a VCR/DVD Recorder
1
Open the LCD monitor to turn on the
camcorder.
• To connect using the AV connectors
(analog dubbing)
Preparation:
• Create a playlist.
• Set [SWITCH TO ANALOG I/O] to
[OUTPUT].
• Turn off all units.
DC Connector
AC Adapter
I
•
To AC Outlet
AV Connector
2
Set the VCR/DVD recorder to its AUX
input mode.
Check that the images from the camcorder
are input correctly to the VCR/DVD
recorder.
3
Play back playlists on the camcorder.
1) Touch MENU.
2) Select [DUBBING PLAYBACK].
3) Select the desired playlist.
4) Select [YES]. (A black screen is
displayed for 5 seconds at the first and
the last scene.)
4
At the point you want to start
dubbing, start recording on the VCRI
DVD recorder.
Refer to the VCR/DVD recorder's
instruction manual.
• To stop dubbing
Stop recording on the VCR/DVD recorder.
• To hide the date or icons on the screen
Change the settings in [DISPLAY ON TV].
VCR/DVD Recorder
AV Connector
(Input)
34
EN
Switching indication modes on LCD
monitor
Each time you touch DISPLAY, indications
on LCD monitor switch as shown below;
In recording mode:
All indications/Indications for selected
functions
In playback mode:
All indications/Only date and time/No
indications