2: Manual Pairing; 3: Pairing To A Previous Series Intercom Device; 4: Pairing With A Non-Interphone (Anycom™) Device; Two-Unit Intercom Conversation - Cellular Line Tour User Manual

4.1.2: Manual pairing

1. With the intercom off, on each unit, press and hold
2. Then briefly press only on one of the two units.

4.1.3: Pairing to a PREVIOUS SERIES INTERCOM device

1. With the second Interphone unit (previous series) off, press and hold the central MFB button until
alternate red/blue flashing of the LEDs.
2. With TOUR Interphone off, press and hold
3. Press briefly on TOUR Interphone.
4.After a few seconds the units will be paired and the intercom conversation will be started.
4.1.4: Pairing with a NON-Interphone (ANYCOM™) device.
1. In the NON-Interphone unit, start the telephone search/pairing mode; refer to the user manual of the
intercom to be paired.
2. With TOUR Interphone off, press and hold
3. Press on TOUR Interphone.
4. After a few seconds the units will be paired and the intercom conversation will be started.

4.2 Two-unit intercom conversation

1. Pair unit 1 with unit 2 (Chap. 4.1.2), operation only required the first time.
2. Press briefly on unit 1 or on unit 2.
3. Press again briefly on unit 1 or on unit 2 to interrupt the communication.
1
music

4.3 Three-unit intercom conversation

1. Pair unit 1 with unit 2 and then unit 2 with unit 3 (Chap. 4.1.2), operation only required the first time.
2. Press briefly on unit 2 to start the conversation in conference between units 1, 2, 3.
1
music
fm
Commands with conference active:
• Press again on unit 2 to interrupt the conversation in conference.
• Or press on unit 1 to interrupt the conversation with other units
• Or press on unit 3 to interrupt the conversation with other units.
• From unit 2, it is possible to call only unit 3 by pressing the "UP" button for 3 seconds, or only unit 1,
by pressing the "DOWN" button for 3 seconds
until the LED flashes red/blue.
until the LED flashes red/blue.
until the LED flashes red/blue.
2
music
fm fm
2 3
music music
fm fm
SU
music
fm
GIÙ

4.4 Four-unit intercom conversation

1. Pair unit 1 to 2, then unit 2 with 3 and finally unit 3 with 4. (Chap. 4.1).
2. Press briefly on unit 2 to start the conversation in conference between units 1, 2, 3.
3. Press briefly on unit 4 to start the conversation in conference between units 1, 2, 3 with unit 4.
1 2
music music
fm fm
• Press the button interrupts the conversation between the other units.

4.5 Automatic reconnection

TOUR INTERPHONE has the function of auto reconnection. When the unit is out of range, it will attempt
to reconnect. During the search period, an alert message will be heard.
After 10 minutes, if reconnection is not successful, the unit will go into Standby mode, interrupting the
reconnection attempts. To stop the reconnection attempts, press the button
which auto reconnection is being attempted.

4.6 VOX Intercom

The VOX function allows the device to activate (speaking), or deactivate (by remaining silent), the inter-
com communication automatically.
To deactivate the function, set "Vox Intercom" on "Off" (see Chap. 3.1).

4.7 Warnings and suggestions

During use in three/four user conference, to ensure the best system stability, avoid connecting other
Bluetooth devices (telephones, GPS, etc.) to the intercom units.
®
Optimum operation of group conversation is ensured by only using Interphone-branded devices. The
audio quality of the "INTERCOM" function is strongly influenced by:
• the correct installation of speakers and microphone inside the helmet.
• surrounding environment (electromagnetic disturbances, natural obstacles etc.).
• the aerodynamic protection features of the motorcycle.
• type of helmet being used.
3 4
music music
fm fm
of one of the units on
7