Service Information; Full One Year Warranty - Bostitch CAP1615-OF Instruction Manual

3. Remove filter cover (J) from base.
4. Remove element from filter base.
5. Place new element back in filter base. Purchase replacement parts from your local dealer
or authorized service center. Always use identical replacement parts.
6. Snap filter cover to filter base.
Hot surfaces. Risk of burns. Do not operate without air inlet filter.
ACCESSORIES
The use of any other accessory not recommended for use with this tool could be
hazardous. Use only accessories rated equal to or higher than the rating of the air compressor.
Recommended accessories for use with your tool are available for purchase from your local
dealer or authorized service center. If you need assistance in locating any accessory for
your tool, please contact Bostitch Fastening Systems 701 E. Joppa Road Towson, Maryland
21286,call 1-800-556-6692.

SERVICE INFORMATION

Please have the following information available for all service calls:
ModelNumber_____________________SerialNumber_______________________________
Date and Place of Purchase ____________________________________________________
REPAIRS
To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be
performed by a BOSTITCH factory service center, a BOSTITCH authorized service center or
other qualified service personnel. Always use identical replacement parts.

FULL ONE YEAR WARRANTY

BOSTITCH heavy duty industrial tools are warranted for one year from date of purchase. We will
repair, without charge, any defects due to faulty materials or workmanship. For warranty repair
information, call 1-800-556-6692. This warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This warranty gives you specific legal
rights and you may have other rights which vary in certain states or provinces.
This warranty does not apply to products sold in Latin America. For products sold
LATIN AMERICA:
in Latin America, see country specific warranty information contained either in the packaging,
call the local company or see website for warranty information.
FREE WARNING LABEL REPLACEMENT (FIG. 4):
call 1-800-556-6692 for a free replacement.
FIG. 4
If your warning labels become illegible or are missing,
WARNING
WARNING
DO N OT ADJUST FACTORY SETTINGS.
ADVERTENCIA
TO REDUCE RISK OF ELE CTRIC SHOCK
DO N OT REMOVE COVER.
Pressure controls set at factory for
maximum sa fe ope ration.
AVERTISSEMENT
ADVERTENCIA
NO HAGA CAMBIOS EN LOS AJUSTES
DE FÁBRICA. NO RETIRE LA TAPA PARA
REDUCIR EL RIESGO DE CHOQUE ELÉ CTRICO.
Los controles de presión se ajustan en la
fábrica para máxima segu ridad en la ope ración.
AVERTISSEMENT
13
HOT SURFACES
SUPERFICIES CALIENTES
SURFACES CHAUDES