Advertisement
3. Fan the paper.
4. Lift the paper bar (1) and load
paper (up to 500 sheets 20-lb. US
Bond). Keep the stack below the
full line (2).
5. Lower the paper bar and push the
tray back into the printer.
Note: To install paper in Tray 1:
a. Open the Tray 2 front panel.
b. Slide Tray 1 out.
AUTOFEED
To set the printer to switch to Tray 2 when
Tray 1 is empty:
Printers with Operator Panel:
Set AUTOTRAY on in the Print Menu.
Printer with online Status Monitor:
Go to the Paper tab in the Status Monitor.
Select Auto Tray Switch.
Activate the Tray in
the Printer Driver
®
Windows
PCL Driver
Start → Settings → Printers
1. Click
[
Printers and Faxes
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Oki printer icon,
then click
Properties.
3. Click the
Device Option(s)
4. For
, select
Available Tray
.
Cassette
5. Click
, then close the Printers
OK
(Printers and Faxes) dialog box.
PostScript Emulation Driver,
(Printers with Postscript option
installed).
Start → Settings → Printers
1. Click
[
Printers and Faxes
The Printers (Printers and Faxes)
dialog box opens.
2. Right click the Postscript
emulation printer icon, then click
.
Properties
3. Next:
– Windows XP, 2000 and NT 4.0:
click the
Device Settings
– Windows Me and 98: click the
tab.
Device Options
4. Then:
– Windows XP, 2000, NT 4.0 and
Me: under
Installable Options
click
Available Tray
– Windows 98: under
setting for Available Tray
2 (1 Optional Tray)
5. Click
, then close the Printers
OK
(Printers and Faxes) dialog box.
Macintosh
PostScript Emulation Driver,
(Printers with PostScript option
installed)
OS 8.x and 9.x
1. Activate
menu.
2. Select
3. Click
4. Click
5. Change the
to
2 (1 Optional Tray)
6. Click
7. Close
OS X.1
No activation is required for
for XP].
Macintosh OS X.1.
OS X.2
1. Activate
Hard Drive → Applications →
tab.
Utilities → Print Center
Lower
2. Highlight the printer name and
select from the menu
Show Info
3. Click the
drop-down menu and select
Optional Tray)
4. Click
the desktop.
for XP].
tab.
,
and select 2.
Change
, select
.
®
from the Apple
Chooser
.
LaserWriter 8
Printer → Setup
.
.
Configure
setting
Available Tray
.
twice.
OK
Chooser
.
from
Print Center
Local
.
Printers →
.
Available Tray
2 (1
.
and exit to
Apply Changes
Advertisement
