Network Setup
■
How to set up using WPS(PBC)
If your router has a PBC (WPS) button, follow these steps:
1. Go to
Network Settings
follow the directions of
2. Select the WPS(PBC).
3. Press the
◀
within 2 minutes. Your TV automatically
acquires all the network setting values it
needs and connects to your network.
4. The network test screen appears, and
network setting is done.
(WPS(PBC))
screen. To enter it,
Network
WPS(PBC)
button on your router
Network Settings
Settings.
Select a network connection type.
Wired
Wireless(General)
WPS(PBC)
One Foot Connection
● The displayed image may differ depending on the
model.
English
2/6
Previous
Connect to the Access Point
Next
easily by pressing the WPS(PBC)
button. Choose this if your
Access Point supports PUSH
Cancel
▶
button Configuration(PBC).