Samsung UN40D6500 E-Manual page 230

Problem
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting to
Anynet+ device..." appears on
◀
the screen.
Possible Solution
•
Check if the Anynet+ device is properly connected to the TV and
check if the Anynet+ (HDMI-CEC)
Setup menu.
•
Press the TOOLS button to display the Anynet+ menu and select a
menu you want.
•
Select in the Anynet+ menu.
View TV
•
Press the SOURCE
non- Anynet+ device.
•
You cannot use the remote control when you are configuring
Anynet+ or switching to a view mode.
•
Use the remote control when the Anynet+ setting or switching to
view mode is complete.
English
is set to On
button on the TV remote control and select a
in the Anynet+
▶