Advertisement
I
NSTALLATION
Reinstallation of the Doors
1. Install hinge assemblies:
• Install top hinge loosely with
head screws.
• Install center hinge with Phillips
screws.
2. Place hinge side of freezer door on
bottom hinge pin and hold freezer
door upright while installing center
hinge pin with
5
" hex head driver.
⁄
16
• Replace plastic sleeve.
• Replace any applicable door shims.
• Make sure the hinge pin is installed
tightly.
3. Place hinge side of refrigerator door
on center hinge pin.
4. While holding refrigerator door upright, tighten
down top hinge with
replace hinge cover.
5
" hex
⁄
16
5
" hex head driver and
⁄
16
Handle Removal
(style varies by model)
Materials Needed:
•
3
" allen wrench
⁄
32
To Remove:
• Remove set screw from
handle mounting post
using
3
" allen wrench.
⁄
32
• Repeat the procedure on
all posts to remove the
handle.
To Replace:
• Align handle with the
mounting posts.
• Fully tighten all set screws to secure handle
in place.
6
Advertisement
